When space is tight, the 4410A delivers the single cable networked convenience of Smart IP in a powerful, super-compact format.
4410A
Smart IP Installation Speaker
SPL
96 dB
Amplifier Power
18 W Bass (Class D) + 18 W Treble (Class D)
Frequency Response
67 Hz - 40 kHz (-6 dB)
Accuracy of Frequency Response
± 2.5 dB (74 Hz - 20 kHz)
Driver Dimensions
⌀ 76 mm Woofer + ⌀ 19 mm Tweeter (view in inches)
Dimensions
H 181 x W 121 x D 115 mm, (view in inches)
Weight
1.5 kg / 3.3 lb
Connections
1 x RJ45 AES67 / Dante Input
4410A Installation Speakers
Technical Specifications
When space is tight, the 4410A delivers the single cable networked convenience of Smart IP in a powerful, super-compact format.
System Specifications
Frequency Response
74 Hz - 20 kHz (± 2.5 dB)
Low cutoff -6dB
67 Hz
High cutoff -6dB
40 kHz
SPL
Peak SPL Maximum peak acoustic output per unit in a listening room with music material, at 1 m, using PoE+ power.
≥100 dB
Short term max SPL Maximum short-term sine wave output on axis in half space, average 100 Hz to 3 kHz, at 1 m, using PoE+ power.
≥96 dB
Long term max SPL Maximum long-term RMS acoustic output in same conditions with IEC-weighted noise, at 1 m using PoE+ power (limited by driver unit protection circuit and the PoE power supply being used).
≥91 dB
Self-generated noise
Self-generated noise Self generated noise level in free field at 1 m on axis (A-weighted).
≤5 dB
Weight
Weight1.5 kg (3.3 lb)
Dimensions
Height
181 mm
Width
121 mm
Depth
115 mm
Enclosure
Enclosure material
Die cast aluminium
Enclosure type
Reflex port
Drivers
Driver type
Cone
Diameter
76 mm
Driver type
Metal dome
Diameter
19 mm
Directivity
Harmonic distortion
> 200 Hz ≤0.5 %
Amplifier Section
Amplifiers
18 W Class D
18 W Class D
Mains voltage
PoE+/PoE
Power consumption
ISS Active
≤3 W
Idle
≤4 W
Full output
30 W
Signal processing section
Connectors
Input Ethernet (Power over Ethernet and Audio over IP)